Change the Hub password and install a console certificate
The factory Hub administrator password is print4life. Change it after setup.
[Step] A. Open System → Security and change the Hub administrator password
- Open the Hub console and select System → Security → Change password.
- Enter the new password and save.
This password controls Hub console access and Hub authentication; it is separate from the ezeep account password.
[/Step]
[Step] B. Enable Make Hub invisible for the Finder if needed
Under System → Security, enable Make Hub invisible for the Finder if needed. The Hub disappears from Finder five minutes after reboot. Finder may also become read-only after five minutes once the administrator password is first changed.
Record its address or enable remote management before hiding it. Troubleshoot Finder access if needed.
[/Step]
[Step] C. Upload a certificate matching the Hub’s address and reboot
- Obtain a certificate from a public or organizational certificate authority. Its name must match the Hub hostname, fully qualified domain name or IP address you use.
- If issued by your organization, ensure client computers trust its certificate authority.
- Open Certificates in the Hub console, upload the web server certificate, and reboot the Hub.
- Open the console using the address covered by the certificate.
Download any logs you need before rebooting.
[/Step]
If the certificate does not work
Check certificate name, server-authentication usage and the Hub’s time. Correct the system time if necessary.