Change the Hub’s network settings
In the Hub console, open Network. Have the replacement network details ready: changing the address or Wi-Fi can disconnect your session.
[Step] 1. Set the Hub’s hostname, comments and location under Identification
Under Identification, set Hostname and optional Comments and Location, then save. The default name ends with six digits of the MAC address, which is also shown here.
[/Step]
[Step] 2. Choose DHCP or enter the static IPv4 settings, then save
- Open IPv4 Settings. Choose Use DHCP or Manual configuration.
- For manual configuration, enter address, subnet mask, gateway, primary/secondary DNS servers and search domain as required.
- Save and reopen the console at its new address if needed.
Hub Finder address changes are temporary; for a persistent static address, use Manual configuration. The Hub also displays its automatically generated IPv6 address.
[/Step]
[Step] 3. Select a Wi-Fi network and enter its credentials
- Under Wi-Fi, select Refresh, choose the network, then Connect.
- Enter its credentials and requested settings. For a hidden network, select Add Network and enter the SSID, Hidden network flag and matching security type.
Supported choices shown in the console include NONE/WEP, WEP dynamic, OWE, WPA, WPA3, WPA enterprise and WPA3 enterprise. The Upon startup, enable WLAN access point for a duration of 10 minutes option controls the temporary setup network.
[/Step]
[Step] 4. Enter the proxy address and port, then save
Under Proxy, enter your proxy address and TCP port, then save.
[/Step]
[Step] 5. Enable Cloud Management and allow the remote-management connections
- Under Remote Management, enable Cloud Management and save.
- Allow outbound TCP 443 to
*.ezeep.comand TCP 8883 to*.azure-devices.net.
Then open the Hub remotely once claimed.
[/Step]
[Step] 6. Open Cloud Connect and sign in to the intended ezeep organization
Under Cloud Connect, select Connect and sign in with an administrator account for the intended ezeep organization. This imports the Hub’s configured printers.
[/Step]
After changing networks
If you lose the Hub’s address, run Hub Finder from the new network. If it disappears or keeps an old static address, troubleshoot Hub access.