Skip to content
English
  • There are no suggestions because the search field is empty.

Collect Windows logs for ezeep support

Use the ThinPrint Diagnostic Utility on a Windows computer running Print App for Desktops, ezeep Connector for Windows or the Remote Desktop Agent. For a Hub, collect Hub logs instead.

Have a Windows administrator perform these steps. Enabling or disabling logging requires restarting the relevant service, which can interrupt printing.

[Step] 1. Install the Diagnostic Utility, enable logging and restart the services

  1. Download the utility from ThinPrint Diagnostic Utility.
  2. Run the installer with administrator permissions, then open the utility.
  3. Select the ThinPrint Logging tab.
  4. Choose Browse and select the folder for the logs. Ensure the relevant users have permission to read, write and modify files in that folder.
  5. Select the available components to log. The header checkbox enables all available components; follow support’s instructions if they requested specific ones.
  6. Select Apply and Restart Services.

The default location, if no different path is selected, is:

C:\Users\<user_name>\AppData\Local\Temp\TPLogs\

If you use Apply without restarting, restart the relevant service with Restart Selected Service before reproducing the problem.

[/Step]

[Step] 2. Reproduce the failure, note its time and collect the log files

  1. Repeat the action that fails.
  2. Note the exact time and time zone, the user account, printer and error message.
  3. Use Open log file location to find the logs, or open the folder you selected.
  4. Zip the relevant logs for your ezeep support case.

[/Step]

[Step] 3. Disable logging and restart the services after the test

Clear the selected component checkboxes, or choose Disable all, then select Apply and Restart Services.

Do not leave diagnostic logging running after the test unless support asks you to. Large log files can reduce component performance; the utility highlights files above 100 MB in yellow and above 300 MB in red.

Send the collected files through the channel agreed with your support contact.

[/Step]