Skip to content
English
  • There are no suggestions because the search field is empty.

Collect your print job with a QR code or card

Use these steps if your organization enabled Pull Printing. Jobs sent to AnyPrinter by ezeep stay in a queue until released at a printer.

[Step] 1. Send your document to AnyPrinter by ezeep

  1. Print from an ezeep app, your document’s print menu, or Print Now in the ezeep portal.
  2. Select AnyPrinter by ezeep, then Print.

[/Step]

[Step] 2. Release the job by scanning the printer’s QR code or your paired card

With a QR code

  1. At the printer, open ezeep on your phone and go to My Print Jobs.
  2. Select the job, tap Release, and scan the printer’s QR code.

With an NFC card

At the printer’s release station, scan your card on the reader and wait for the confirmation beep.

[/Step]

Cannot release the job?

Check that you sent it to AnyPrinter by ezeep. Ask your administrator if the queue or release method is unavailable. Held jobs expire after 72 hours.

If your organization releases jobs by choosing a printer in the mobile app instead, see Print Later. Administrators: Set up Pull Printing.