Skip to content
English
  • There are no suggestions because the search field is empty.

Configure status monitoring and system time

Use printer monitoring to read printer status, and Hub monitoring to let your monitoring system query the Hub itself.

[Step] 1. Configure Global SNMP Settings to monitor printer status

  1. Open the Hub console.
  2. Under Printers, open Global SNMP Settings.
  3. Choose and configure the SNMP version supported by your printers.
  4. Save, then check the status symbols in the printer list.

For SNMP v1 and v2c, enter the community name configured on the printers. The default is public; the monitored printers must use the same community name.

For SNMP v3, enter the user name, authentication type and authentication passphrase. SHA is available for authentication; MD5 is listed for testing only. If privacy is configured, select DES or AES and provide the privacy passphrase.

The SNMP proxy option lets a monitoring system query the Hub for the status of all configured printers.

[/Step]

[Step] 2. Configure SNMP under Hub Monitoring to monitor the Hub itself

  1. Open Network > Hub Monitoring.
  2. Configure SNMP v1/v2c, SNMP v3, or both.
  3. Use the community name or v3 authentication and privacy settings expected by your monitoring system.
  4. Save.

Printer monitoring and Hub monitoring are separate settings. Configure the one required for the system you want to monitor.

[/Step]

[Step] 3. Check System Time and set a reachable NTP server if needed

The Hub uses UTC. With internet access, it connects to a time server automatically.

  1. Open System > System Time.
  2. Check the displayed ezeep Hub time.
  3. If necessary, enter an Additional time server, preferably your organization’s NTP server, and save.
  4. If no NTP server is reachable, use Assign workstation time.

Correct time helps make logs useful and allows certificate checks to work correctly.

[/Step]