Skip to content
English
  • There are no suggestions because the search field is empty.

Fix “Hub Unknown,” “Hub not connected” or “Hub already claimed”

When claiming a Hub under Connectors → +Claim Hub, follow the section matching the error.

[Step] A. Hub Unknown: check internet access, update firmware and retry claiming

The cloud does not recognize the Hub. Old firmware or an update performed without internet access can leave it unregistered.

  1. Use Hub Finder on the local network to open the Hub console.
  2. Check internet access and install compatible firmware for its hardware and starting version.
  3. Allow the update and reboot to finish, then retry +Claim Hub.

[/Step]

[Step] B. Hub not connected: check power, network access and Cloud Management

The Hub is recognized but cannot be reached.

  1. Check power and internet access, including outbound TCP 443 to *.ezeep.com and TCP 8883 to *.azure-devices.net.
  2. Restart the Hub, allow several minutes for startup, then retry.
  3. If needed, open the local console and enable Network → Remote Management → Cloud Management. Save and retry.

[/Step]

[Step] C. Hub already claimed: give the chatbot its MAC to release the previous claim

The Hub belongs to another ezeep organization. Check the Connectors list in other organizations you administer, using its MAC address or DNS name.

To release the previous claim, ask us in the chatbot and provide the Hub’s MAC address. A factory settings reset does not release an organization claim.

[/Step]

Once the Hub is claimed

Once claimed, select drivers, assign access and print a test page.