Skip to content
English
  • There are no suggestions because the search field is empty.

Open the Hub console locally or remotely

Use the Hub console to manage printers, network settings, firmware and logs. The Hub administrator password is different from your ezeep password.

[Step] A. Open the Hub’s remote-window icon in Connectors and sign in

For remote-management availability by plan, see ezeep pricing.

  1. In the ezeep portal sign in as an administrator and open Connectors.
  2. Find the Hub, select its remote-window icon, and sign in using the Hub administrator password.

The Hub must show Online under Connectors, with Cloud Management enabled. If it will not open, troubleshoot console access.

Connectors list with the Hub’s remote-window icon at the right of its row.
Use the remote-window icon at the right of the Hub’s row to open its console.

[/Step]

[Step] B. Find the Hub locally with Hub Finder and sign in to its console

  1. Connect a Windows computer to the same local network as the Hub.
  2. Download Hub Finder from Apps & Downloads in the ezeep portal.
  3. Run Finder and select the Hub’s IP-address link.
  4. Sign in with the Hub administrator password. The factory default is print4life if unchanged.

If you know its address, open it directly in a browser.

[/Step]

Where to find a setting

  • Printers: Manage printers, discovery and status monitoring.
  • Network: Hostname, IP, Wi-Fi, proxy, Remote Management, Hub Monitoring and Cloud Connect.
  • Pull Printing: Configure card release.
  • Certificates: Manage the console certificate.
  • System: Password, reboot/reset, backup, firmware, time and logs.

The header has Language, Info, Help and Logout; use Info for installed versions.

Hub console with its navigation menu and printer table, including Add Printer.
Use the menu on the left to switch between printer, network, Pull Printing, certificate and system settings.

Continue

New Hub? Set it up. Existing Hub? Browse Hub tasks.