Skip to content
English
  • There are no suggestions because the search field is empty.

Set up a Hub with an NFC card reader

Configure an ezeep Hub with an NFC reader to release held jobs when a user scans a card.

Before you start

For overall configuration or QR-code release, see Secure Pull Printing.

[Step] 1. Select Get new pull printing password for the Hub and copy it

  1. In the portal, open Connectors and select the Hub.
  2. Select Get new pull printing password and copy the password.

[/Step]

[Step] 2. Enable Pull Printing in the Hub console, paste the password and save

  1. Open the Hub’s remote console using its remote-window icon, then sign in with the Hub administrator password.
  2. Open Pull Printing, enable Enable pull printing, enter the copied password and save.

[/Step]

[Step] 3. Copy the physical printer’s ID and save it as Personal printer ID

  1. In the portal, open Printers, select the physical release printer, and copy its ID from the details pane.
  2. In the Hub console under Pull Printing, enter that ID as Personal printer ID and save.

[/Step]

[Step] 4. Scan the card and follow the printed welcome page to pair it

  1. Scan the NFC card and collect the printer’s Welcome to ezeep page.
  2. Follow that page to pair the card.

The pairing code expires after 24 hours. Scan again to obtain a new code.

[/Step]

[Step] 5. Assign AnyPrinter, send a test job and release it with the paired card

  1. In the portal, open Printers → Network Printers and edit AnyPrinter by ezeep.
  2. Open Assignments, select Groups or Users, choose the intended users or groups, and select Save.
  3. Have a user print to AnyPrinter by ezeep, then scan the paired card at the release station.

For users: Collect a job using a card or QR code. For rollout: Secure Pull Printing setup.

[/Step]