Skip to content
English
  • There are no suggestions because the search field is empty.

Set up Pull Printing with QR codes or cards

Pull Printing holds jobs in AnyPrinter by ezeep until users authenticate at a printer with a QR code, an NFC card, or a compatible printer-panel app. For availability by plan, see ezeep pricing. Held jobs expire after 72 hours.

[Step] 1. Open Policies and enable Pull Printing

  1. Sign in to the ezeep Admin Portal, open Policies, and enable Pull Printing.

Turning off Pull Printing or removing a group from the policy does not immediately prevent users from releasing jobs already held. They can still release those jobs until they expire after 72 hours.

Policies page with separate Enable Pull Printing and Enable Print Later switches.
Turn on Enable Pull Printing under Policies.

[/Step]

[Step] 2. Generate a QR code for each release printer or set up an NFC reader

QR codes

  1. Open Printers → Network Printers and edit a physical printer.
  2. Open Pull Printing and select Generate QR Code.
  3. Choose whether to Include Printer name, then set the Page size and Code size.
  4. Select Download PDF or Download QR image, or use Copy QR to clipboard.
  5. Print the code and attach it to the matching printer. Repeat for each release printer.

Generating a QR code is separate from pairing an embedded printer app, where you enter the code shown on the printer and select Pair Printer.

Printer Editor Pull Printing tab with QR-code controls on the right and printer-app pairing on the left.
Use Generate QR Code on the right. The pairing controls on the left are for a printer-panel app.

NFC cards

An NFC reader and ezeep Hub are required. Cards with changing IDs are not supported. Follow Configure an ezeep Hub and card reader.

On first pairing, the printer produces a welcome page. The pairing code expires after 24 hours; scanning the card again generates a new code.

[/Step]

[Step] 3. For panel release, install and configure the HP or Lexmark app

For compatible printers, follow the HP Workpath or Lexmark embedded-app guide. Complete the AnyPrinter assignment below.

[/Step]

[Step] 4. Assign AnyPrinter by ezeep to the users or groups

  1. Open Printers → Network Printers and edit AnyPrinter by ezeep.
  2. Open Assignments, select Groups or Users, choose who can use Pull Printing, and select Save.

If you assigned the holding queue during card-reader setup, check the assignment instead of repeating it.

[/Step]

[Step] 5. Send a job to AnyPrinter and release it using your chosen method

  1. Have an assigned user send a test document to AnyPrinter by ezeep.
  2. QR code: In the mobile app, open My Print Jobs → Release and scan the printer’s code.
  3. NFC card: Present the paired card to the release station.
  4. Printer-panel app: Authenticate and release the held job.

Give users Collect your print job with a QR code or card.

[/Step]