Skip to content
English
  • There are no suggestions because the search field is empty.

Troubleshoot access to the Hub console

When the Hub console is unavailable, start with power, network cables and the Hub LEDs. Use local access if the remote console fails.

[Step] 1. Remote console unavailable: check network access and enable Cloud Management

  1. Check internet access, including outbound TCP 443 to *.ezeep.com and TCP 8883 to *.azure-devices.net.
  2. Open the console locally using Hub Finder. Under Network → Remote Management, enable Cloud Management and save.
  3. In the ezeep portal, open Connectors and select the remote-window icon.

Hub not claimed? Set up and claim it.

[/Step]

[Step] 2. Hub missing after a network move: scan its new subnet with Hub Finder

Check that the Hub has a valid gateway. In Hub Finder, specify the subnet to scan. If it shows an address from another subnet, change the address in Finder, then set the required DHCP or static configuration in the console.

[/Step]

[Step] 3. Hub on an old static IP: connect on that subnet or reset its settings

Either reset the configuration to defaults, or connect a computer/VM to the Hub’s physical network with an unused IPv4 address on its existing subnet. Open the console, switch IPv4 Settings to DHCP, then rediscover the Hub.

[/Step]

[Step] 4. Hub disappears from Finder: use its known address or remote management

Make Hub invisible for the Finder may be enabled. The Hub stops appearing after five minutes; open its known address or use remote management.

[/Step]

[Step] 5. Finder is read-only: make changes through the Hub console

Finder becomes read-only five minutes after startup when the administrator password was changed for the first time or invisibility is enabled. Make changes through the Hub console.

[/Step]

[Step] 6. Finder address reverts: set the static IP in the Hub console instead

Changing an address in Finder does not disable DHCP. To keep a static address, use Network → IPv4 Settings → Manual configuration in the console.

[/Step]

[Step] 7. Password rejected: use the Hub password or reset settings if access is lost

Use the Hub administrator password—not the ezeep account password. The default is print4life only if unchanged. If access is lost, reset Hub settings. For certificate warnings, check the console certificate.

[/Step]